秋霞人妻无码中文字幕,免费国产黄线在线观看,色94色欧美sute亚洲线路一,国产精品原创巨作av,无码喷潮a片无码高潮,老司机久久99久久精品播放免费,国产精品白丝jkav网站,高潮喷吹一区二区在线观看

Scan the QR-code to get technical consultation?
immediately

KEY-205E Halogen-Free, No-Clean, Lead-Free Flux
  • KEY-205E Halogen-Free, No-Clean, Lead-Free Flux

KEY-205E Halogen-Free, No-Clean, Lead-Free Flux

Consult Now
客服電話 0755-8966 0860 / 13823780855


KEY-205E Halogen-Free, No-Clean, Lead-Free Flux

Product Highlights?

Lead-Free and Environmentally Friendly Formula
Halogen-Free Ingredients
No Cleaning
Good Wettability
Wide Applicability
Safe and Non-irritating


Product Introduction

KEY-205E No-clean lead-free solder flux is composed of high-quality modified rosin resin, organic activator, multiple additives and isopropyl alcohol. The solder flux has excellent solderability, full and bright solder joints, good tin penetration and uniform tinning; it can meet the soldering needs of various lead-free solders and is an ideal no-clean solder flux for lead-free solder soldering.


Product Features

Effectively reduce the surface tension of lead-free solder and improve the fluidity and solderability of solder.

Strong wetting power and good tin penetration of through holes can effectively make up for the shortcomings of poor tin penetration of lead-free solder.

The post-soldering residue spreads evenly, has good finish, and has excellent electrical reliability.

It does not contain environmentally prohibited substances such as RoHS and is an environmentally friendly solder flux.


Scope of Application

This product can be used with various lead-free solders and is widely used in electronic industries such as power products, computer motherboards, graphics cards, communication equipment, audio and video equipment, refrigeration equipment, and medical equipment. It can be used by spraying, dipping and foaming processes.


Physical and Chemical Parameters

Item

Parameters

Model

KEY-205E

Welding machine classification

REL0

Appearance

Light yellow transparent liquid

Non-volatile matter content (wt%)

1.70±0.20

Specific Gravity (g/cm3@20℃)

0.797±0.010

Acid value (mgKOH/g)

36.50±5.00

Expansion rate (mm2)

≥80

Silver chromate test paper

PASS

Halogen content(%)

L0

Copper mirror corrosion

PASS

Corrosion test

PASS

Surface insulation resistance (Ω)

≥10×108

Electromigration

PASS

RoHS

PASS


Operation Mode

Spraying: Pay attention to cleaning the nozzle to make the flux atomization reach the best state, and make the PCB pass through the best atomization area to ensure that the flux is sprayed evenly on the PCB and the spray amount is appropriate. Do not spray the flux on the components.

Dipping: The depth of the PCB board immersed in the flux cannot exceed 2/3 of the board thickness, and the flux cannot be dipped on the top surface of the board.

Foaming: Pay attention to the selection and cleaning of the foaming tube to achieve the best foaming effect. The depth of the PCB board immersed in the foam is preferably 1/2-2/3 of the board thickness. It is best to add a wind knife to make the flux coating even, remove the excess flux, and avoid the flux coating on the components. The solvent is easy to volatilize during use. If the specific gravity increases, the diluent and flux stock solution used with the flux should be used to adjust the specific gravity. After a period of use, the active ingredients in it will be consumed, causing the flux activity to decrease, and the flux in the flux tank needs to be replaced regularly (it is recommended to be replaced every 4-7 days).


Application Guide

Item

Parameters

Remark

Plate preheating temperature (℃)

Double sided board 80- 100

Single sided board 70-90

Bottom preheating temperature (℃)

Double sided board 90- 120

Single sided board 80-110

Tin furnace temperature (℃)

255-275

Determined according to solder requirements (actual measurement)

Conveying speed (m/min )

1.0-1.5

/

Tinning time (S)

2.5-5.0

/

Orbital inclination (0)

5-8

/

Flux application amount (solid amount) (μg/cm2)

Single Wave: 160-260

Single Wave: 180-320

Do not apply flux to the surface of components

Packaging Specifications

18L/barrel, 20L/barrel, 50L/barrel, 100L/barrel, 250L/barrel


Please Note

  1. After opening this product and taking out the used part, the lid must be closed tightly to prevent the solvent from volatilizing and causing a change in specific gravity.
  2. Used flux and unused flux cannot be placed in the same packaging barrel. After the flux is opened, if there is still residual flux in the barrel, it cannot be left open to the air and the lid should be tightened as soon as possible.
  3. The container containing the flux should be kept clean to prevent dirt and other substances from mixing into the flux and affecting the quality of the flux.
  4. If there are special requirements for electronic products, it is recommended to perform relevant compatibility tests.
  5. For safety protection and other precautions, please refer to the MSDS of this product.


Storage and Transportation Requirements

  1. Before transportation, check whether the packaging container is complete and sealed;
  2. The installation location should be away from power sources, fire sources and other places;
  3. During transportation, ensure that the container does not leak, collapse, fall or be damaged
  4. ?It is strictly forbidden to mix and transport with chemicals such as oxidants;

Contact Us

WeChat official account


本站使用百度智能門戶搭建 管理登錄
主站蜘蛛池模板: 五月丁香综合缴情六月小说 | 欧美激欧美啪啪片sm| 久久成人影院精品99| 中无码人妻丰满熟妇啪啪| 潮喷大喷水系列无码久久精品| 中文无码字幕一区到五区免费| 2022久久国产精品免费热麻豆| 狠狠色狠狠色五月激情| 自偷自拍亚洲综合精品麻豆| 国产亚洲精品第一综合麻豆| 国产一区二区三区精品av| 国产精品视频yy9299| 亚洲精品中文幕一区二区| 综合色区国产亚洲另类| 国产精欧美一区二区三区| 小12箩利洗澡无码视频网站| 极品粉嫩福利午夜在线播放| 国产免费久久精品99re丫丫| 亚洲男男无套gv大学生| 伊人久久大香线蕉午夜| 狠狠躁夜夜躁人人爽天天古典| 亚洲影院丰满少妇中文字幕无码| 一本大道大臿蕉无码视频| 性夜夜春夜夜爽aa片a| 国产精品一区二区 尿失禁| 少妇高潮无套内谢麻豆传| 成人免费无码大片a毛片18| 日韩午夜福利无码专区a| 黑人大战日本人妻嗷嗷叫不卡视频| 亚洲精品一区三区三区在线观看| 老色鬼在线精品视频在线观看| 国产性一交一乱一伦一色一情| 精品熟女少妇av久久免费软件| 好了av四色综合无码久久| 国产精品超清白人精品av| 成人无码视频在线观看网址| 免费午夜福利不卡片在线播放| 亚洲a∨国产av综合av网站| 亚洲精品无码成人片久久| 草裙社区精品视频三区免费看| 久久久精品成人免费观看|